Desiccant Air Dryers

Compact cold regenerating dryers & heat regenerating adsorption dryers

BEKO DRYPOINT AC & EVERDRY FRA / FRA-V Air Dryers

A BEKO desiccant dryer works according to the adsorption principle. The air is passed at intervals through a container filled with a desiccant. The desiccant is regenerated simultaneously in a second container. With DRYPOINT AC desiccant dryers, we can provide refrigeration regenerating and, alternatively, heat-regenerating desiccant dryers with EVERDRY FRA & FRA-V. Both series are suitable for complying with high quality air requirements where very low pressure dew points must be achieved or with very high volume flow. This method for compressed-air drying can achieve pressure dew points down to -70°C.

Cold-regenerated Desiccant Dryers – The BEKO DRYPOINT AC Series

Reliable drying – even under high pressure: When the conditions are unfavourable and the air volume flows are higher, then the demands on the construction design of a compressed-air dryer are also higher. The DRYPOINT AC cold-regenerated adsorption dryer is particularly robust and durable due to its high-quality components. They remove the humidity from the compressed air in an efficient and safe manner by utilising a desiccant. A small proportion of the dried compressed air is subsequently implemented for regeneration. Compressed air losses are therefore retained at consistently low levels and the operating costs are significantly reduced.

Compact construction design – benefits with quality, efficiency and service

DRYPOINT AC 119-196 – for flow rates of 10 – 120 m³/hr: The compact adsorption dryer can be connected to any worldwide standard power supply. 20 different installation options make this series particularly flexible. The desiccant is filled in cartridges and extracts moisture from the compressed air up to a pressure dew point of -40°C.

DRYPOINT AC 450-495 / HL – for flow rates up to 8200 m³/hr: The innovative shuttle valve of this series allows flow even in the event of power failure, making the system particularly safe. Extracts moisture from the compressed air up to a pressure dew point of -40°C (optional -70°C).

DRYPOINT AC HP – for high pressure from 100 – 350bar: Standard in stainless steel – Maximum service life – Easy and fast maintenance. Properties that make this high-pressure dryer particularly sturdy. Extracts moisture from the compressed air up to a pressure dew point of -40°C (optional -70°C).

Heat-regenerated Desiccant Dryers – The BEKO EVERDRY Series

The EVERDRY desiccant dryer series offers standardised system concepts with a wide range of possible variations as a heat-regenerating adsorption dryer for compressed air. The highly complex tasks involved in compressed-air drying of larger volume flows can therefore be solved particularly economically. Customer-specific requirements can be fulfilled with individual solutions. In such cases it is not the availability, rather the solution-oriented, optimal technology which determines the concept for a drying plant or system. Working in partnership, Kerr and BEKO develops and project manages complete concepts which are tailor-made to each customer´s individual requirements.

Series facts at a glance:

• For volume flows from 600 – 100,000 m³/h, on request for even larger volume flows
• Also for demanding installation conditions in tropical areas, corrosive environments or well-insulated cold regions
• Optionally trimmed for maximum energy efficiency with EVERDRY eco
• Technology diversity adapted to customer needs
• Energy-efficient concepts possible through waste heat utilization